Front Suspension for 2006 Chrysler Pacifica
No.
Part # / Description / Price
Price
11
Nut And Washer 
Mopar
Mopar Description: To Body Attaching. Passenger Airbag Mounting. Hex/Cone M8x1.25. Wiring attaching. Folding Top Attaching. Sled.
$18.33 CAD
$18.33 CAD
13
$36.42 CAD
14
Front Knuckle, Right Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: FRONT
14
Front Knuckle, Left Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: FRONT
15
Brake Hub And Bearing Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: With Sensor.
16
Hub Stud Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Stud with Flat Side use 6503288. M12x1.50x45.88. [brb or bre].
$31.40 CAD
$31.40 CAD
17
Hex Head Screw And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Starter To Transmission. Engine Mount To Cylinder Block. Starter To Engine Block. Bearing to Knuckle. Y-Pipe To Exhaust Manifold. M10x1.50x65.00. Starter motor to engine.
$26.68 CAD
$26.68 CAD
18
Control Arm, Left Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: CONTROL
18
Control Arm, Right Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: CONTROL
19
Hex Nut And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: M12x1.25. Knuckle to LCA. Steering gear to tie rod end. Tie Rod Ends to Tie Rod. Strut to Strut Rod. Knuckle to Lower Control Arm.
$18.33 CAD
$18.33 CAD
21
Ball Joint Fitting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Zirc.
24
Nut Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Lower Control Arm to Cradle.
27
Bolt Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Lower Control Arm Mounting Rear. Lwr control arm rr to cradle.
28
Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: LCA to Axle. Lower Control Arm Mounting Front. Lwr control arm frt to cradle. LCA to Body.
29
$152.46 CAD
30
Hex Nut And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: M12x1.75. Link to Sway Bar. Use With Link Kit #68399868AD. Link to Strut. Front Engine Mount To Cradle. I-link to knuckle.
$12.40 CAD
$12.40 CAD
32
Hex Flange Head Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE.
Description: Sway Bar Bracket to Axle. Sway Bar to Cradle. Sway Bar Retainer to Frame Mounting. Engine Mount to Cradle. Sway Bar Retainer to Axle. M10x1.50x35.00.
$20.63 CAD
$20.63 CAD
34
Hex Head Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE.
Description: Heat Sheild To Engine Mount. Wiring Harness to Bracket. M6x1.00x11.00. Heat Shield to Mount. Clmn bridge to frt end. Size M4X0.7X16.5 Steering Wheel Module to Column. Engine Mount Heat Shield. Engine Mount Bracket To Cylinder Block. Ground Strap to Urea Tank Crossmember.
$9.56 CAD
$9.56 CAD
36
Sway Eliminator Cushion Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
$40.17 CAD
$40.17 CAD
38
Camber Adjustment Bolt Kit Mopar
Mopar Description: Strut to Knuckle. 2 Per Vehicle. 2 Bolts Included in Each Kit. Only 2 Kits Needed. This Is A Repair Package For One Side, See Quanity. Use With Service Strut.
$181.50 CAD
$181.50 CAD